Emtek 76041 Wrought Steel San Carlos Door Pull 24 in. CtC
Rustic Collection
May be used separately or with pull plates.
Appliance/Door pulls come standard with Thru-Bolt Mounting. Optional Concealed Surface Mount available. Use prefix CS (ie: CS87001) when ordering.
Back-to-Back option not available for this pull.
Thru-Bolt mounting and Back-to-Back mounting fits standard door thickness of 1-3/4 in. Specify if thicker. Concealed Surface mounting fits minimum door thickness of 1-1/4.
Appliance Pulls are drilled and tapped for 3/8 in. - 16 thread to accommodate thread adapters.
24 in. Center to Center
21-15/16 in. Overall Length
3 in. Projection
Pull Width: 1-3/8 in.
Base Width: 3-3/16 in.
Standard Thru-Bolt Mounting supplied with: two thread adapters for 1/4-20 thread; two 1/4-20 flat head machine screws x 1 in. long; two thread adapters for 10-32 thread; two 10-32 flat head machine screws x 1 in. long; two 10-32 flat head machine screws x 2 in. long; two threaded washers; two decorative caps.
Concealed Surface mounting supplied with: one grip with 3/8 in. diameter hole in the stem; two no.10 x 1 in. bevel head wood screws; two 1-32 set screws.
Sold as complete set.
Specify finish when ordering.
Click on an image to view its full size.
WARNING:This product can expose you to chemicals which are known to the State of California to cause cancer, to cause birth defects or other reproductive harm. Wash your hands after installing for uninstalling this product.
For more information, go towww.P65Warnings.ca.gov.The following part numbers are available by selecting the options above.
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
